Response of Damped Oscillators to Cycloidal Pulses

In this paper, the transient response of a damped oscillator subjected to cycloidal pulses is investigated. The response is computed analytically by considering viscous and friction damping, and response spectra for relative and absolute quantities are presented for the linear viscous and sliding oscillator. The study complements the list of numerous shock spectra mostly published for the undamped linear oscillator. Subsequently, a numerical procedure based on a state-space formulation is developed to compute the response of damped oscillators when subjected to ground motions recorded near the source of strong earthquakes. It is found that although in several occasions such motions resemble to cycloidal pulses, the response of structures with low to moderate periods is substantially affected by the high-frequency fluctuations that often override the long duration pulse.     

Gender stereotyping over instant messenger: The effects of gender and context

Researchers have observed that contrary to the high expectations for online communications, gender stereotyping has not disappeared in this medium, and is sometimes even accentuated. This study aimed to understand the effect of gender over instant messenger, a relatively new and unexplored medium. Instant messenger was chosen because it is a medium that is used most by youth who have grown up communicating online. Participants were interviewed over instant messenger about a potential online support service and were then asked to judge the effectiveness of their interviewer. The interviewer was identified only by a masculine or feminine name and was computer-simulated so as to remove any bias. The topic of discussion was stereotypically masculine or stereotypically feminine. Male participants were found to employ a male superiority heuristic, whereby they judged the male interviewer as more competent, regardless of the context. Female participants were hypothesized to judge the female interviewer as more competent in the feminine context, and the male interviewer as more competent in the masculine context (the context-gender match heuristic), but this hypothesis was not supported. The findings are discussed in the context of previous research on gender stereotyping in online communication.     

On identification of well‐conditioned nonlinear systems: Application to economic model predictive control of nonlinear processes

The focus of this work is on economic model predictive control (EMPC) that utilizes well‐conditioned polynomial nonlinear state‐space (PNLSS) models for processes with nonlinear dynamics. Specifically, the article initially addresses the development of a nonlinear system identification technique for a broad class of nonlinear processes which leads to the construction of PNLSS dynamic models which are well‐conditioned over a broad region of process operation in the sense that they can be correctly integrated in real‐time using explicit numerical integration methods via time steps that are significantly larger than the ones required by nonlinear state‐space models identified via existing techniques. Working within the framework of PNLSS models, additional constraints are imposed in the identification procedure to ensure well‐conditioning of the identified nonlinear dynamic models. This development is key because it enables the design of Lyapunov‐based EMPC (LEMPC) systems for nonlinear processes using the well‐conditioned nonlinear models that can be readily implemented in real‐time as the computational burden required to compute the control actions within the process sampling period is reduced. A stability analysis for this LEMPC design is provided that guarantees closed‐loop stability of a process under certain conditions when an LEMPC based on a nonlinear empirical model is used. Finally, a classical chemical reactor example demonstrates both the system identification and LEMPC design techniques, and the significant advantages in terms of computation time reduction in LEMPC calculations when using the nonlinear empirical model. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3353–3373, 2015     

Rocking Response of Free-Standing Blocks under Cycloidal Pulses

This paper examines in depth the transient rocking response of free-standing rigid blocks subjected to physically realizable trigonometric pulses. First, the expressions for the dynamic horizontal and vertical reactions at the pivot point of a rocking block are derived and it is shown that the coefficient of friction needed to sustain pure rocking motion is, in general, an increasing function of the acceleration level of the pulse. Subsequently, this paper shows that under cycloidal pulses a free-standing block can overturn with two distinct modes: (1) by exhibiting one or more impacts; and (2) without exhibiting any impact. The existence of the second mode results in a safe region that is located on the acceleration-frequency plane above the minimum overturning acceleration spectrum. The shape of this region depends on the coefficient of restitution and is sensitive to the nonlinear nature of the problem. This paper concludes that the sensitive nonlinear nature of the problem, in association with the presence of the safe region that embraces the minimum overturning acceleration spectrum, complicates further the task of estimating peak ground acceleration by only examining the geometry of free-standing objects that either overturned or survived a ground shaking.     

Minimizing energy consumption in reverse osmosis membrane desalination using optimization-based control

This work focuses on the design and implementation of an optimization-based control system on an experimental reverse osmosis (RO) membrane water desalination process in order to facilitate system operation at energy optimal conditions. A nonlinear model for the RO process is derived using first principles and the model parameters are computed from experimental data. This model is combined with appropriate equations for reverse osmosis system energy analysis to form the basis for the design of a nonlinear optimization-based control system. The proposed control system is implemented on UCLA’s experimental RO desalination system and its energy optimization capabilities are evaluated.     

Rocking Response of Anchored Blocks under Pulse-Type Motions

This paper examines the transient rocking response of anchored blocks subjected to physically realizable horizontal pulse-type motion. Restrainers with elastic-brittle and elastic-plastic behavior are considered. Under one-sine pulse, anchored blocks can overturn with two distinct modes of overturning: (1) by exhibiting one impact; and (2) without exhibiting any impact. It is found that restrainers are more efficient in preventing overturning of small slender blocks subjected to low frequency pulses. This study uncovers that, although for most of the frequency range anchored blocks survive higher accelerations than free-standing blocks, there is a finite frequency range where the opposite happens. This paper examines this counterintuitive behavior and explains the destructive effect that increased strength and increased ductility of restrainers have on the rocking stability of rigid structures when excited by certain ground motions.     

Model-predictive control of feed flow reversal in a reverse osmosis desalination process

Model-predictive control algorithms are applied to a high capacity reverse osmosis (RO) membrane desalination process simulation that utilizes feed flow reversal in order to prevent and/or reverse scale crystal formation on the membrane surface. A dynamic non-linear model which incorporates feed concentration and membrane properties is used for simulation and demonstration of optimally controlled feed flow reversal. Before flow reversal can take place on a high capacity RO plant, the flow into the membrane unit must be carefully reduced to eliminate the risk of membrane module damage and unnecessary energy consumption. A cost function is formulated for the transition between the normal high flow steady-state operating point to a low flow steady-state operating point where it is safe to reverse the flow direction. Open-loop and closed-loop simulations demonstrate non-linear model-predictive control strategies that induce transition from the high-flow to low-flow steady-states in an optimal way while subjected to plant-model mismatch on the feed concentration, actuator magnitude and rate constraints, and sampled measurements.     

KnowBaSICS-M: an ontology-based system for semantic management of medical problems and computerised algorithmic solutions

In this paper, an ontology-based system (KnowBaSICS-M) is presented for the semantic management of Medical Computational Problems (MCPs), i.e., medical problems and computerised algorithmic solutions. The system provides an open environment, which: (1) allows clinicians and researchers to retrieve potential algorithmic solutions pertinent to a medical problem and (2) enables incorporation of new MCPs into its underlying Knowledge Base (KB). KnowBaSICS-M is a modular system for MCP acquisition and discovery that relies on an innovative ontology-based model incorporating concepts from the Unified Medical Language System (UMLS). Information retrieval (IR) is based on an ontology-based Vector Space Model (VSM) that estimates the similarity among user-defined MCP search criteria and registered MCP solutions in the KB. The results of a preliminary evaluation and specific examples of use are presented to illustrate the benefits of the system. KnowBaSICS-M constitutes an approach towards the construction of an integrated and manageable MCP repository for the biomedical research community.     

A two-folded impact analysis of schema changes on database applications

Database applications are becoming increasingly popular, mainly due to the advanced data management facilities that the underlying database management system offers compared against traditional legacy software applications. The interaction, however, of such applications with the database system introduces a number of issues, among which, this paper addresses the impact analysis of the changes performed at the database schema level. Our motivation is to provide the software engineers of database applications with automated methods that facilitate major maintenance tasks, such as source code corrections and regression testing, which should be triggered by the occurrence of such changes. The presented impact analysis is thus two-folded： the impact is analysed in terms of both the affected source code statements and the affected test suites concerning the testing of these applications. To achieve the former objective, a program slicing technique is employed, which is based on an extended version of the program dependency graph. The latter objective requires the analysis of test suites generated for database applications, which is accomplished by employing testing techniques tailored for this type of applications. Utilising both the slicing and the testing techniques enhances program comprehension of database applications, while also supporting the development of a number of practical metrics regarding their maintainability against schema changes. To evaluate the feasibility and effectiveness of the presented techniques and metrics, a software tool, called DATA, has been implemented. The experimental results from its usage on the TPC-C case study are reported and analysed.